Textile threads and woven fabric materials used to illustrate fabric costing

How to Calculate Woven Fabric Cost per Metre: A Practical Costing Guide

Two woven fabrics with the same quoted price per metre may have very different cost structures—and a low estimate can become misleading if it uses the wrong width, GSM or yarn-consumption allowance. A useful cost sheet starts with the actual construction and follows the fabric through preparation, weaving, processing, inspection and packing. The method below gives buyers and production teams a way to check the assumptions behind a quotation.

1. What is woven fabric costing?

Woven fabric costing is the process of estimating the total cost required to manufacture and deliver a specified fabric quantity. The calculation should begin with an agreed technical specification, not simply a product name such as TC, poplin, twill or Oxford.

Before preparing a cost sheet, confirm the fibre composition, warp and weft yarn counts, ends and picks per inch or centimetre, weave, finished GSM, finished and cuttable width, colour, finishing requirements, testing standard, order quantity, packing method and delivery term.

2. Main components of a woven fabric cost sheet

  • Yarn or raw-material cost: warp and weft yarns, including the correct blend and yarn specifications.
  • Material allowance: expected yarn loss, loom waste, selvedge, process shrinkage and other construction-specific allowances.
  • Preparation and sizing: winding, warping, sizing chemicals, sizing conversion and related labour or energy.
  • Weaving conversion: loom running cost, labour, power, maintenance and production efficiency.
  • Wet processing and finishing: desizing, scouring, bleaching, dyeing, printing where applicable, stentering, calendaring, sanforizing or other agreed finishes.
  • Quality and packing: inspection, laboratory testing, roll packing, labels and packaging materials.
  • Factory overhead and commercial costs: administration, finance, commissions where applicable, inland transport, freight, insurance and other order-specific expenses.

3. A useful first estimate: fabric weight per running metre

For a quick preliminary estimate, convert the finished fabric GSM and width into kilograms per running metre:

Fabric kg per metre = GSM × width in metres ÷ 1,000

For example, assume a finished fabric is 150 GSM and 1.50 metres wide:

150 × 1.50 ÷ 1,000 = 0.225 kg per running metre.

This is the finished fabric mass per metre. It is a useful cross-check and a starting point for an estimate, but it is not a substitute for a construction-based warp and weft yarn-consumption calculation. Actual yarn input depends on yarn count, ends and picks, crimp, selvedge, loom waste, shrinkage and process losses.

4. Estimate yarn cost per metre

For a preliminary estimate using an average yarn rate:

Estimated yarn cost per metre = finished fabric kg per metre × average yarn price per kg × material allowance factor

If the expected allowance is 4%, the factor is 1.04. For a final mill cost sheet, calculate warp and weft consumption separately whenever possible, because the two systems may use different counts, fibres, prices and loss allowances.

For blended fabrics, do not assume one yarn price for every component. Calculate the cost of each yarn according to its actual share and specification, then add the relevant process allowances. Keep the basis of every percentage clear: a percentage applied to yarn input is not necessarily the same as a percentage applied to finished fabric weight.

5. Add conversion, processing and order costs

After estimating yarn cost, add the charges that apply to the specific production route. A simple structure is:

Manufacturing cost per metre = yarn cost + preparation and sizing + weaving + dyeing and finishing + inspection and packing

Then add the applicable factory overhead and order-specific expenses. Avoid counting the same item twice. For example, if a supplier’s weaving conversion rate already includes power and labour, do not add those costs again as separate line items.

6. Worked example: an illustrative woven-fabric estimate

The following numbers are for explaining the calculation only. They are not current market prices, a supplier quotation or a benchmark for any country or fabric type.

Cost itemIllustrative amount per metre
Finished mass: 0.225 kg × yarn rate $3.00/kg × 1.04 allowance$0.702
Preparation and sizing$0.050
Weaving conversion$0.180
Dyeing and finishing$0.350
Inspection and packing$0.040
Allocated overhead$0.080
Illustrative total cost$1.402

In this example, the estimated cost is $1.402 per metre before any selling margin, finance charge or additional delivery cost not already included. If a seller adds a 10% markup on cost, the selling price is $1.5422 per metre. If the target is a 10% gross margin on selling price, the calculation differs: $1.402 ÷ (1 − 0.10) = $1.5578 per metre.

Important: markup and gross margin are not interchangeable. State which method is used in the quotation and make sure the cost base includes all applicable expenses.

7. Convert price per metre into price per yard

For woven fabric sold by the yard, use the exact length conversion:

Price per yard = price per metre × 0.9144

Using the illustrative $1.402 cost above: $1.402 × 0.9144 = approximately $1.282 per yard. This conversion changes the length unit only; it does not change the fabric specification, width or quality.

8. Why fabric specifications change the cost

  • GSM: higher fabric mass generally requires more material per square metre, although yarn structure and construction also matter.
  • Width: a wider fabric uses more material per running metre at the same GSM. Compare the agreed finished and cuttable width, not just loom width.
  • Yarn count and density: warp and weft counts, ends and picks affect yarn consumption, loom performance and fabric properties.
  • Fibre composition: cotton, polyester, viscose and blended yarns have different input prices and processing characteristics.
  • Colour and finish: white, solid-dyed, printed, coated or specialty-finished fabric may require different processing routes and testing.
  • Order quantity: small lots can carry higher setup, colour-change, sampling and minimum processing costs per metre.
  • Quality requirements: tighter tolerances, special tests, shade controls and restricted-substance requirements can add cost and time.

9. Common fabric costing mistakes

  • Using greige GSM or width when the buyer requires finished GSM or cuttable width.
  • Applying one average yarn rate to a fabric with different warp and weft materials without checking the blend.
  • Ignoring crimp, selvedge, loom waste, shrinkage or process losses.
  • Comparing a grey-fabric price with a fully dyed and finished fabric price.
  • Adding overhead twice because conversion charges already include some factory expenses.
  • Confusing markup with gross margin.
  • Comparing a price per kilogram with a price per metre without converting both to the same usable basis.
  • Quoting without defining colour, test requirements, tolerance, packing, delivery term and payment conditions.

10. Buyer checklist before confirming a fabric quotation

  • Is the fibre composition and yarn construction confirmed?
  • Are warp and weft counts and fabric density specified?
  • Is GSM stated as greige or finished, with a tolerance?
  • Is width stated as greige, finished or cuttable width?
  • Are colour, shade standard and finishing route confirmed?
  • Are testing, inspection and acceptance criteria agreed?
  • Are MOQ, quantity tolerance, production lead time and shipment window clear?
  • Does the price specify per metre or per yard, currency, Incoterm, packing and payment terms?
  • Are all charges included or clearly identified as exclusions?

Frequently asked questions

How do you calculate woven fabric cost per metre?

Estimate warp and weft yarn cost per metre, including the appropriate material allowances, then add preparation, sizing, weaving, processing, inspection, packing and applicable overheads. Add commercial and delivery costs according to the quotation terms.

Does higher GSM always mean a higher fabric price?

Not always. Higher GSM often means more material per square metre, but the final price also depends on fibre, yarn price, construction, width, processing route, order size and quality requirements.

What is the difference between markup and gross margin?

Markup is calculated on cost. Gross margin is calculated as a share of the selling price. For a 10% target gross margin, divide total cost by 0.90; do not simply multiply cost by 1.10.

Can GSM and width alone give an accurate fabric quotation?

No. They help estimate fabric mass per running metre, but an accurate quotation also needs yarn counts, density, fibre composition, weave, processing, quality requirements, quantity and delivery terms.

Related textile guides

Further reading and technical references

For additional technical context, see the Textile School woven-fabric costing calculator, the International Textile Manufacturers Federation production-cost report, and the Institute of Chartered Accountants of Pakistan textile-industry guideline. Actual mill costing methods and allowances vary by construction, machinery, process route and factory accounting practice.

Hubei Jintian Textile shares practical fabric knowledge for textile buyers, merchandisers, manufacturers and garment professionals.

Scroll to Top
Verified by MonsterInsights