Understanding GSM, Width and Construction in Woven Fabric

Fabric knowledge

GSM, width and construction: three essentials in a fabric RFQ

A useful fabric inquiry identifies more than a product name. GSM, usable width and construction help the buyer and supplier describe the same material and reduce misunderstandings during quotation and production.

GSM: fabric mass per area

GSM means grams per square metre. It is a common way to describe fabric weight, but weight alone does not tell you everything about thickness, cover, strength or drape. Fiber, yarn count, weave, density and finishing can all influence the fabric’s feel and performance. Specify the target GSM and the acceptable tolerance, and agree how it will be tested.

Width: distinguish grey width from cuttable width

Grey width is measured before finishing; finished width is measured after the relevant wet and dry processes. Cuttable or usable width is the width available for garment cutting under the agreed conditions. Width can affect fabric consumption and marker efficiency, so state exactly which width you require and how it should be measured.

Construction: identify warp and weft

Woven construction describes the warp and weft arrangement and density. A notation such as 45 × 45 yarn count with 96 × 72 construction is meaningful only when the supplier and buyer agree on the units and conventions being used. State yarn count system, ends and picks, weave type and any special yarn requirements where relevant.

Put the details together

A practical RFQ may specify composition, yarn count, warp × weft construction, weave, GSM, finished cuttable width, color, finishing, test requirements, quantity and delivery destination. For example, a buyer might request a polyester-cotton woven fabric with a defined blend, yarn count, construction, 90 GSM target and a specified cuttable width. The supplier should confirm feasibility and quote against that exact combination.

Common specification gaps

  • Using only a trade name without fiber percentages.
  • Giving nominal width but not the cuttable-width requirement.
  • Omitting tolerance for GSM or construction.
  • Not stating whether price is for grey, dyed or finished fabric.
  • Requesting “washable” or “anti-pilling” without test methods or acceptance criteria.

Clear specifications make quotations easier to compare and reduce avoidable production disputes. Ask for written confirmation of the complete specification before sampling or bulk production.

Ask our team about a fabric specification.

Fabric RFQ checklist for buyers

Before sending an inquiry, confirm that the specification uses consistent units and identifies the finished product rather than only the grey fabric. If a requirement is critical, state the acceptable tolerance and the method used to check it. This makes supplier quotations easier to compare and helps both sides agree on what will be approved.

  • Material: fiber composition and percentage by weight.
  • Construction: yarn count system, warp and weft density, and weave type where applicable.
  • Finished fabric: target GSM, finished cuttable width, color and finishing.
  • Quality: shrinkage, colorfastness, pilling or other tests relevant to the end use, with agreed test methods.
  • Commercial details: quantity by color, packing, delivery destination and target shipment date.

Why approved samples matter

A development or lab-dip sample can help align color and appearance, while a fabric sample can help review handle and construction. Before bulk production, record the approved sample reference, specification, tolerances and required tests. A sample is not a substitute for a written specification; both should be linked to the order requirements.

Scroll to Top
Verified by MonsterInsights