Yarn skeins and fibre material shown as an illustrative image for a fabric-composition guide.

Cotton, Viscose, Modal and Lyocell: A Fabric Buyer’s Comparison Guide

Cotton, viscose, modal and lyocell are all cellulose-based fibres, but they are not interchangeable names. Cotton is a natural seed fibre. Viscose, modal and lyocell are regenerated cellulosic fibres produced through different manufacturing routes. The fibre name is only one part of fabric performance: yarn, construction, finishing and care conditions also matter.

1. Cotton

Cotton is a natural cellulosic fibre obtained from the cotton plant. It is used in woven and knitted fabrics for shirts, trousers, pocketing, casualwear and many other products. Buyers should consider fibre length and quality, yarn count, construction, fabric weight, finishing, shrinkage and colourfastness. “100% cotton” alone does not guarantee a particular softness, strength or shrinkage result.

2. Viscose

Viscose is a regenerated cellulosic fibre often selected for drape and a soft hand. Its wet and dry performance, dimensional stability and appearance depend on the fibre specification, yarn construction, fabric structure and finishing. Buyers should assess the actual finished fabric and care process rather than assuming all viscose behaves identically.

3. Modal

Modal is a type of regenerated cellulosic fibre. It is commonly used where softness and drape are important, but the final result still depends on yarn and fabric construction. Confirm the generic fibre name and any specific branded claim in the supplier documents.

4. Lyocell and TENCEL™

Lyocell is a generic fibre type. TENCEL™ is a trademark used for certain fibres produced by Lenzing; not every lyocell fabric is automatically a TENCEL™ product. If a brand claim is part of the order, request the relevant documentation and verify the claim through the supplier’s authorised supply chain.

5. What should a buyer compare?

Buyer question What to specify or test
Fibre identity Generic fibre names, percentages by mass and any separately documented brand claim.
Comfort and handle Approved hand-feel sample, fabric construction and relevant end-use assessment.
Dimensional stability Washing or care procedure, shrinkage method and acceptance limit.
Strength and durability Suitable tensile, tear, abrasion or seam tests for the intended garment.
Colour performance Approved shade standard and required washing, rubbing or perspiration fastness tests.
Care and use End-use conditions, care label requirements and destination-market rules.

6. Verify fibre claims properly

Appearance, touch and a simple burn test cannot reliably distinguish every cellulosic fibre or quantify a blend. Use a laboratory method suitable for the claimed fibre mixture when verification is required. The laboratory should state the method, sample condition, result and reporting basis. Keep the test sample traceable to the fabric article and production lot.

7. RFQ wording buyers can use

“Fibre composition: [generic fibre names and percentages by mass]. Fabric construction: [yarn count, weave/knit, GSM and finished width]. Intended end use: [garment/application]. Required performance: [shrinkage, strength, colourfastness and other relevant tests with methods and limits]. Any branded-fibre claim must be supported by the required supplier documentation.”

Buyer takeaway: choose the fibre for the product’s actual comfort, appearance, durability, care and cost requirements. Confirm composition and performance on the proposed finished fabric before bulk approval.

Related: how to identify textile fibres and fibre composition verification.

Scroll to Top
Verified by MonsterInsights