A supplier may describe one fabric as TC and another as CVC, but those labels are only a starting point for comparison. The actual cotton and polyester percentages matter, as do the yarn, weave, GSM and finish. Put the blend ratio in the RFQ and purchase order so that the buyer, mill and testing team are working to the same definition.
What does TC mean?
TC commonly refers to a polyester-cotton blend in which polyester is the larger share, such as 65% polyester and 35% cotton. However, commercial usage varies, so the quotation and purchase specification should state the actual percentages rather than relying on the abbreviation.
What does CVC mean?
CVC commonly means chief value cotton and is generally used for blends with a higher cotton share than polyester. Exact market conventions can vary. State the intended composition, for example 60/40 or 80/20 cotton/polyester, and confirm the order documentation uses the same fiber order throughout.
How composition can affect fabric selection
Fiber ratio may influence hand feel, moisture behavior, appearance, durability, care requirements and cost. The final result also depends on yarn count, weave, density, finishing and construction. Do not assume that a TC or CVC label alone guarantees a specific performance result.
Compare the full specification
- Exact fiber percentages and any recycled-content documentation
- Warp and weft yarn count and construction
- Weave type and target GSM
- Finished and cuttable width with tolerances
- Color, shade standard and finishing requirements
- Required tests and acceptance limits
- Quantity by color, packing, destination and delivery basis
Questions to ask a supplier
Ask whether the quotation is based on greige or finished fabric, what finished and cuttable widths are guaranteed, which finishing processes are included, how shade lots are identified, and which test reports are available. If the fabric will be garment-washed or industrially laundered, state that process before the supplier selects a construction. Request a representative sample and written approval before bulk production.
Compare the fibre ratio, not just the abbreviation
In common sourcing language, CVC usually describes a cotton-majority cotton/polyester blend, while TC is often used for a polyester-majority blend. These are trade conventions, not complete technical specifications, and usage can vary between suppliers and markets. A ratio such as 60/40 is not enough on its own: the order must say which fibre is 60% and which is 40%.
| Illustrative shorthand | Composition written in full | What the buyer should confirm |
|---|---|---|
| CVC 60/40 | 60% cotton / 40% polyester | Confirm that cotton is the larger share and that the same ratio appears in the quotation and purchase order. |
| TC 65/35 | 65% polyester / 35% cotton | Confirm that polyester is the larger share; do not rely on the letters alone. |
| 50/50 blend | 50% cotton / 50% polyester | Write both fibre names and percentages in full rather than assuming whether the supplier calls it TC or CVC. |
These ratios are examples, not prescribed definitions or standard blend recipes. Neither CVC nor TC is a quality grade. A cotton-rich fabric is not automatically softer, more breathable or more durable than every polyester-rich alternative; yarn, construction, finishing and the intended care process all matter.
Check the warp and weft separately when necessary
In a woven fabric, the warp and weft do not always use identical yarns. One direction may use a blended yarn while the other uses a different count or composition. Ask whether the quoted fibre ratio applies to both yarn systems or to the finished fabric’s overall fibre content. If the warp and weft differ, record each yarn’s composition and count in the technical specification. This avoids a situation in which the mill, buyer and laboratory are each interpreting the same shorthand differently.
How can the cotton/polyester ratio be verified?
Where composition verification is required, specify a quantitative fibre-analysis method with the laboratory rather than relying on appearance or a simple burn check. ISO 1833-11:2017 describes a sulfuric-acid method for determining the mass percentage of certain cellulose fibres, including cotton, in mixtures with polyester and other listed fibres. ISO records this edition as published and confirmed in 2022. The method has a defined scope: if the sample contains elastane, additional fibre types, coatings or unusual finishes, ask the laboratory to confirm the applicable method and any required pretreatment before testing. The purchase specification should identify the sample, method, reporting basis and acceptance requirement.
A composition test is not automatically required for every order. The buyer should decide whether it is needed for initial approval, periodic verification, a disputed lot or a destination-market compliance programme.
Use the correct fibre names in market documentation
For textile products covered by the United States Textile Fiber Products Identification Act and its rules, the Federal Trade Commission requires fibre content to be disclosed using generic fibre names and percentages by weight in descending order of predominance. “CVC” or “TC” should not replace the actual fibre names and percentages in a required declaration. This is a United States example, not a universal labelling rule; confirm the requirements for the destination market with the importer or compliance team.
Copy-ready wording for a fabric RFQ
Fibre composition: [__% cotton / __% polyester by fibre mass]. Warp: [yarn count and composition]. Weft: [yarn count and composition]. Weave: [type]. Finished GSM: [target and tolerance]. Width: [finished width and usable/cuttable width, with tolerances]. Colour and finish: [reference and process]. Testing: [method, edition and acceptance limit]. Quantity and delivery: [quantity by colour, destination and agreed delivery basis].
Keep the fibre order consistent across the quotation, approved sample, purchase order, test request and shipping or labelling documents. If recycled content or another special fibre claim is required, request the relevant supporting documentation separately; the words TC or CVC do not establish that claim.
For more detail, see our CVC fabric guide, TC fabric guide and fabric RFQ checklist.
- ISO 1833-11:2017 — Quantitative chemical analysis of certain cellulose-fibre mixtures.
- U.S. Federal Trade Commission — Textile and Wool Acts labelling guidance.
For a comparable quotation, send Hubei Jintian Textile the full specification, target quantity, color breakdown and destination. Browse our textile range or request current pricing. Final feasibility, price and lead time are confirmed for each inquiry.



