Panty making step 6: join the second side seam and trim threads

Panty Making Step 6: Join the Second Side Seam and Trim Threads

At Step 6, the remaining side seam closes the panty body. Before sewing, match the waist and leg reference points and check that the elastic edges have not twisted during handling. A small alignment error here can leave the garment uneven even when the stitch itself is secure.

Step-by-step method

  1. Check the front and back panels, waistband and leg openings before closing the seam.
  2. Match the remaining side edges and align the waist and leg reference points.
  3. Keep the garment flat and avoid stretching the body or elastic unnecessarily.
  4. Sew the seam using the specified stitch type and seam allowance.
  5. Inspect the seam from top to bottom and check that the garment hangs evenly.
  6. Trim loose threads carefully. Keep scissors away from the fabric, elastic and stitch line.

Quality checkpoints

  • Both side seams are secure and aligned.
  • Waist and leg openings are not twisted or pulled out of shape.
  • No skipped stitches, open seams, holes or damaged elastic.
  • Thread ends are trimmed cleanly without cutting the seam.

The video operation title mentions trimming two times and 7 cm × 2. Follow the factory work instruction for the specific thread ends and measurement points.

This content is blocked because it would connect to YouTube.

Next step

Continue to Step 7: bartack reinforcement, then perform the final workmanship check.

Scroll to Top
Verified by MonsterInsights