A freight quote can change once the forwarder receives the final carton measurements and packed weight. For that reason, importers should check the supplier’s packing figures before comparing LCL or container offers. The worked example below shows how to calculate carton count, net weight, gross weight and CBM—and where an estimate must be replaced by the factory’s actual measurements.


Example shipment details
| Parameter | Example value |
|---|---|
| Order quantity | 1,000 pieces |
| Pieces per carton | 25 pieces |
| Number of cartons | 40 cartons |
| Net weight per tube | 0.35 kg |
| Carton dimensions (L × W × H) | 128 × 28 × 28 cm |
| Estimated packing allowance (cartons and inner packing combined) | 0.04 kg per tube, or 1.00 kg per carton |
Important: This is an illustrative packing model, not a verified factory packing list. Confirm actual packed dimensions and scale weights before booking freight or submitting customs documents.
1. How to calculate the number of cartons
Formula: Total quantity ÷ pieces per carton = number of cartons.
1,000 ÷ 25 = 40 cartons.
2. How to calculate net weight (N.W.)
Net weight is the weight of the goods without the shipping carton and packing materials.
Formula: Quantity × net weight per piece.
1,000 × 0.35 kg = 350 kg net weight.
3. How to calculate gross weight (G.W.)
Gross weight includes the goods plus packaging. Using the example’s estimated 0.04 kg packing allowance per tube:
- Estimated packing weight: 1,000 × 0.04 kg = 40 kg.
- Estimated gross weight: 350 kg + 40 kg = 390 kg.
- Estimated gross weight per carton: 390 kg ÷ 40 = 9.75 kg per carton.
In this example, the 0.04 kg per tube allowance equals 1.00 kg per carton because each carton contains 25 tubes. These are two ways of expressing the same estimated packaging weight, not separate charges. Add the packaging weight only once. Ask the supplier whether its figure includes the outer carton, dividers, foam and other inner packing.
4. How to calculate CBM (cubic metres)
CBM measures the volume occupied by cargo. Convert centimetres to metres, or divide the product of centimetre dimensions by 1,000,000.
Formula: Length (cm) × Width (cm) × Height (cm) ÷ 1,000,000 = CBM per carton.
128 × 28 × 28 ÷ 1,000,000 = 0.100352 CBM per carton.
For 40 cartons: 0.100352 × 40 = 4.01408 CBM, or approximately 4.014 CBM based on the stated outer carton dimensions.
5. Why might a packing sheet show a different total CBM?
The example worksheet estimates packed volume per tube at 0.00404 CBM. Multiplying by 1,000 gives 4.040 CBM. However, the carton dimensions 128 × 28 × 28 cm produce approximately 4.014 CBM for 40 cartons. This small difference may result from rounding or different measurement assumptions.
For freight booking, the forwarder usually needs the actual external dimensions of each packed carton. Ask the factory to measure a fully packed carton and confirm the total carton count. Do not mix individual-item volume with outer-carton volume when declaring shipment CBM.
6. What is the recommended declared volume?
The worksheet suggests 4.24 CBM by adding a buffer of about 5% to its 4.040 CBM item-based estimate. Using the external carton dimensions instead gives approximately 4.014 CBM, or about 4.215 CBM with a 5% allowance.
Therefore, treat 4.014 CBM as the calculated volume from the stated carton dimensions and 4.22–4.24 CBM only as a provisional planning allowance. Confirm the final figure with your freight forwarder; never declare a padded estimate as an exact measured volume.
7. How CBM and weight affect LCL freight charges
For many less-than-container-load (LCL) shipments, freight is charged using a weight-or-measurement basis (W/M), with the chargeable quantity determined by the forwarder’s tariff and shipment rules. The higher applicable measure may affect the quote. Local handling, minimum charges, customs, duties, taxes and delivery can be additional.
When asking for a door-to-door quotation, send the product description, carton count, outer carton dimensions, total gross weight, total net weight, origin, destination and whether the quotation includes customs clearance and delivery.
Pre-shipment packing checklist
- Confirm the final quantity and pieces per carton.
- Measure the external length, width and height of a fully packed carton.
- Record net weight and gross weight separately.
- Check whether carton tare is already included in the packing-weight calculation.
- Calculate total CBM from outer carton dimensions.
- Make sure the commercial invoice and packing list match the actual shipment.
- Ask the freight forwarder to confirm its chargeable-weight and volume rules.
- Verify the HS code with a qualified customs broker based on the exact product specification and applicable national tariff. The partial code visible in the worksheet is not sufficient to confirm a classification.
Quick formulas
- Cartons: Total pieces ÷ pieces per carton, rounded up.
- Net weight: Total pieces × net weight per piece.
- Gross weight: Net weight + all packaging weight.
- CBM per carton: L × W × H in cm ÷ 1,000,000.
- Total CBM: CBM per carton × number of cartons.
Accurate packing data helps importers compare shipping quotations, plan warehouse space and reduce surprises at dispatch. Always use final factory measurements for shipping documents.



