Panty making step 3: attach elastic to the second leg opening

Panty Making Step 3: Attach Elastic to the Second Leg Opening

Once the first leg opening has been finished, the second side needs the same controlled elastic application. The aim is not simply to repeat the sewing motion: both openings should have a comparable stretch, width and appearance when the garment is relaxed. Use the approved size specification rather than copying a fixed elastic length across all sizes.

Step-by-step method

  1. Confirm the second leg edge is correctly positioned and free from twists.
  2. Match the elastic type and required length to the approved size specification.
  3. Feed the elastic and fabric evenly, applying the specified stretch only.
  4. Maintain a smooth curve and consistent stitch formation around the opening.
  5. Trim loose thread and excess material carefully without cutting the garment or elastic stitches.

Quality checkpoints

  • Both leg openings have similar width, stretch and appearance.
  • No twisted elastic, skipped stitches, uneven gathers or exposed raw edges.
  • Left and right sides meet the measurement tolerance and approved sample.
  • The gusset area remains flat and undamaged.

Do not assume the same cut length is correct for every size. Follow the factory’s approved measurement sheet and operation standard.

This content is blocked because it would connect to YouTube.

Next step

Continue to Step 4: join the first side seam and attach the label.

Scroll to Top
Verified by MonsterInsights