Panty making step 2: attach elastic to the first leg opening

Panty Making Step 2: Attach Elastic to the First Leg Opening

The first leg-elastic operation sets the standard for the second opening. If the elastic is stretched unevenly or the fabric is pulled while sewing, the finished edge may ripple, twist or feel too tight. Check the elastic length and feeding method against the approved sample for the garment size before starting the operation.

Preparation

  • Check that the gusset assembly and leg edge are ready for the elastic operation.
  • Confirm the elastic type, width and cut length against the approved sample or work instruction.
  • Check that the machine is set for the specified stitch and elastic-feed method.

Step-by-step method

  1. Position the elastic and leg edge according to the approved construction.
  2. Start with the correct alignment point and feed the fabric evenly.
  3. Apply only the specified stretch; do not pull the garment body unintentionally.
  4. Keep the stitch line consistent around the curve and avoid folds or missed sections.
  5. Trim excess elastic or thread neatly as shown in the operation video; the listed operation references 34 cm × 1, but verify the length against the size and approved specification.

Quality checkpoints

  • Elastic is evenly distributed with no twisting.
  • Leg opening is smooth and symmetrical.
  • No skipped stitches, loose loops, puckering or cut fabric.
  • Elastic recovery and opening measurement meet the approved sample.
This content is blocked because it would connect to YouTube.

Next step

Continue to Step 3: attach elastic to the second leg opening, keeping both sides consistent.

Scroll to Top
Verified by MonsterInsights