Before bulk fabric reaches the cutting room, a few missed checks can turn into marker waste, sewing delays or a disagreement over which rolls were approved. The inspection should follow the buyer’s specification and agreed method, but the sequence below covers the main points to verify on woven fabrics such as TC, CVC, cotton, polyester, twill, Oxford and pocketing.
1. Confirm the approved specification
Compare the fabric against the latest approved specification and sample. Check fiber composition, yarn count, construction, weave, target GSM, finished width, color standard and finishing. Do not rely on a product name alone: two fabrics with the same market name can have different constructions or performance.
2. Check width and GSM
Measure finished width using the agreed method and distinguish total width from usable or cuttable width. Record GSM at several representative points rather than relying on one reading. Confirm tolerances before inspection so that pass/fail decisions are consistent.
3. Review shade and appearance
Compare rolls under consistent lighting and against the approved color standard. Look for roll-to-roll shade variation, streaks, barré, stains, holes, slubs and other defects. For multi-color orders, identify each shade clearly and keep shade groups separate when required by the buyer.
4. Assess finishing and end-use performance
Check handle, surface appearance and the finishing requested in the specification. Where required, review shrinkage, colorfastness, pilling, tear strength or other laboratory results. Terms such as “anti-pilling” should be linked to a stated test method and acceptance limit.
5. Verify roll labels and packing
Confirm roll numbers, length, net weight where applicable, shade/lot identification and packing condition. Keep records that connect inspected rolls to the production lot and test reports. Protect fabric from moisture, dirt and damage during storage and shipment.
6. Record defects and agree corrective action
Use the buyer’s agreed inspection system and defect classification. Photograph significant defects, record roll references and share a concise report. If a lot does not meet the agreed standard, agree on sorting, replacement, reprocessing or another documented resolution before cutting begins.
Buyer checklist
- Approved sample and current specification available
- Composition, construction, GSM and cuttable width checked
- Shade consistency and surface defects reviewed
- Required test reports reviewed against agreed limits
- Roll labels, lengths and packing verified
- Inspection report and corrective actions documented
Hubei Jintian Textile supports sourcing inquiries for woven fabrics including TC, CVC, cotton, polyester, TR, twill, Oxford, satin, pocketing and workwear fabrics. Share your specification and target quantity through our Request Current Price page to discuss feasibility, testing and quotation requirements.



