Categories
[hjt_knowledge_category_tree]
Knowledge Hub
Browse all our fabric and garment knowledge articles in one place, including sourcing, textile testing, fabric quality, garment production and inspection guides.
-

Fabric and Garment Specification Mismatch: How to Prevent Costly Rework
Prevent production disputes by aligning fabric specifications, garment requirements, test methods and approved samples.
-

Fabric Consumption and Marker Waste: How to Reduce Cutting Cost
Practical ways to reduce fabric consumption and marker waste through accurate width data, pattern planning and cutting controls.
-

Mold or Musty Smell in Packed Garments: Storage and Shipping Prevention
How moisture, incomplete drying and storage conditions can affect packed garments, and what to check before shipment.
-

Incorrect Garment Labels and Packing: A Pre-Shipment Checklist
Prevent wrong size labels, care labels, barcodes, assortments and carton marks with a clear packing and labeling control plan.
-

Garment Pockets Tearing: Strength, Stitching and Design Checks
Find out why garment pockets tear and how pocketing fabric, stress points, seam construction and testing reduce failures.
-

Garment Oil Marks and Pressing Shine: How to Prevent Appearance Defects
Troubleshoot oil stains, gloss marks and pressing shine caused by handling, equipment or finishing conditions.
-

Needle Damage and Holes in Finished Garments: Causes and Controls
Identify needle cuts, holes and fabric damage during sewing and apply practical controls to reduce defects.
-

Fabric Roll Length and Weight Discrepancies: How to Verify
A checklist for checking fabric roll length, net weight, labeling and reconciliation before shipment or cutting.
-

Fabric Hand Feel Is Too Stiff or Too Soft: How to Set Expectations
Learn how fiber, yarn, construction and finishing influence fabric hand feel and how to approve it objectively.
-

Oil Stains and Contamination on Fabric: Inspection and Root Cause
How to document oil spots, dirt, and other contamination on fabric rolls and investigate handling or processing causes.
-

Fabric Absorbency Problems: Why Pretreatment and Testing Matter
Understand uneven absorbency and poor wetting in fabric, with practical checks for preparation, finishing and buyer requirements.
-
Fabric Tensile vs Tear Strength: Methods & Buyer Guide
Learn how tensile and tear tests differ, compare ISO and ASTM methods, and investigate low woven-fabric strength results with a…
Featured Products
Explore our fabric range and request current pricing for your requirements.
-
90% Polyester / 10% Cotton | 45×45 / 114×72 | DTM Bleach-Proof | Width: 57–58 inches | 105–110 GSM | USD 0.60/ydRead MoreTC Pocketing Fabric 90/10 45×45 / 114×72 – DTM Bleach-Proof, 105–110 GSM
0.60$Add to cart Pocketing & Lining Fabrics90% Polyester / 10% Cotton | 45×45 / 114×72 | DTM Bleach-Proof | Width: 57–58 inches | 105–110 GSM | USD 0.60/yd
-
90% Polyester / 10% Cotton | 45×45 / 114×72 | DTM | Width: 57–58 inches | 105–110 GSM | USD 0.55/ydRead MoreTC Pocketing Fabric 90/10 45×45 / 114×72 – DTM, 105–110 GSM
0.55$Add to cart Pocketing & Lining Fabrics90% Polyester / 10% Cotton | 45×45 / 114×72 | DTM | Width: 57–58 inches | 105–110 GSM | USD 0.55/yd
-
90% Polyester / 10% Cotton | 45×45 / 114×72 | White | Width: 57–58 inches | 105–110 GSM | USD 0.48/ydRead MoreTC Pocketing Fabric 90/10 45×45 / 114×72 – White, 105–110 GSM
0.48$Add to cart Pocketing & Lining Fabrics90% Polyester / 10% Cotton | 45×45 / 114×72 | White | Width: 57–58 inches | 105–110 GSM | USD 0.48/yd
-
90% Polyester / 10% Cotton | 45×45 / 96×72 | Bleach-Proof | Width: 57–58 inches | USD 0.42/ydRead MoreTC Pocketing Fabric 90/10 45×45 / 96×72 – Bleach-Proof
0.42$Add to cart Pocketing & Lining Fabrics90% Polyester / 10% Cotton | 45×45 / 96×72 | Bleach-Proof | Width: 57–58 inches | USD 0.42/yd
